Electric hoists represent their own machinery, strength, and toughness, while the stage is elegant, flowing, and soft, with conflicts and collisions between the two.

Wholesale Electric Chain Stage Hoist For Truss


Brief Explanation :

High altitude chain hoist hoisting sound system

Category : Stage Chain Hoist Series

Get a Quote

Product Details

High altitude chain hoist hoisting sound system

High altitude chain hoists are mainly used for lifting from higher positions, such as when setting up a stage, lighting, sound equipment, and other equipment need to be placed above. The weight of a relatively large sound system still exists, and it involves several meters of high-altitude operations, so manual installation is still dangerous and difficult. In such a scenario, the stage chain hoist is actually used, and of course, there are also electric hoists. In order to facilitate equipment installation, the chain hoist is usually hung upside down.

In this way, the combination of the hand chain hoist and the stage electric hoist can solve the installation problems in various positions with and without power supply. In this scenario of lifting operations, although the sound equipment is heavy, there will not be 1 ton or 2 tons. When selecting, we choose a 500kg or 1 ton lifting hoist, which is sufficient, and there is no need to worry about overloading. Of course, if the entire steel structure of the installation stage needs to be lifted, the tonnage and weight must be considered. By using such lifting machinery, not only can manpower be saved, but also the danger can be reduced. There is no need to load construction at high altitude, and it can be controlled by pulling the zipper or handle. Of course, if you want to operate on the ground, the chain length needs to be considered to meet the use of stage height.

At the same time, in order to solve the problem of installation angle on stage, a 360 degree chain hoist can also be chosen, so that pulling the chain does not have to consider the problem of angle tilting and difficult operation. It should be noted that equipment is generally relatively large, so it is necessary to consider the issue of avoiding collisions during the lifting process. After confirming installation, the load should be removed.