Electric hoists represent their own machinery, strength, and toughness, while the stage is elegant, flowing, and soft, with conflicts and collisions between the two.

Factory Supplier 2 Ton Chain Hoist


Brief Explanation :

Unscrew the hexagonal nut on the outer shell and then remove the outer shell.

Category : Stage Chain Hoist Series

Get a Quote

Product Details

Steps for replacing the brake pads of the stage hoist:

1: Unscrew the hexagonal nut on the outer shell and then remove the outer shell.

2: Pull off the fastening bolts, use a board to unscrew the hexagonal nuts inside, and remove the inner cover.

3: Next, you can see the brake pads and replace the old ones with the purchased matching brake pads.

4: After installation, fasten the outer shell in sequence and tighten the nuts with screws.

What is the reason for the severe wear and tear of the stage electric hoist?

One is particle wear. Due to the complex usage environment of stage specific hoists, debris such as gravel, metal shavings, and wood shavings may mix into the body, causing wear on internal components such as gears;

The second is friction and wear, which refers to the various types of friction and wear caused by the use of stage gourds due to the collision or impact of hard objects, or the dragging and throwing by workers, on the gourd itself;

The third is fatigue wear, and all mechanical equipment cannot operate continuously for a long time, otherwise it will increase its wear, especially for stage specific hoist hooks, chains, bearings, gears and other easily worn parts.