X
Electric hoists represent their own machinery, strength, and toughness, while the stage is elegant, flowing, and soft, with conflicts and collisions between the two.
Standard details of electric hoist lifting operation
Category : V7 Stage Electric Series
Get a QuoteProduct Details
Standard details of electric hoist lifting operation
1. The lighting on the work site must be good, and one should stand in a position that can be fully observed during the operation.
2. After seeing the command preparation signal, focus highly on preparing for the task.
3. Thoroughly inspect the motor and accessories, ensure that the connectors are firm and reliable, and the rotating parts rotate flexibly.
4. Operate according to the command signal to lower the hook at a suitable height above and below the lifted object. Once tied, direct the lifting.
5. It is necessary to determine whether the lifted object is overloaded and whether the binding is balanced and firm during the lifting process.
6. According to the nature of the work and the on-site situation, press the control button, jog first, and observe the movement of the hoist.
7. Start the electric motor button to slowly and uniformly move the hoist.
8. When lifting, first replace and tighten the steel wire rope, slowly lift it off the ground, conduct a small height and short stroke trial lifting first, and then balance the lifting. Do not lift it during severe vibration.
9. During lifting operations, there should be no other workers near the lifting area to avoid collision, and it is not allowed for the lifting to pass over the heads of other operators.
10. No maintenance work shall be carried out during lifting. If a malfunction occurs during lifting, the main power supply should be cut off in a timely manner, and safety maintenance personnel should be contacted to promptly troubleshoot.
RELATED PRODUCTS .
Powerful Stage Truss Hoist can provide convenience and support for the construction of facilities in large conferences, seminars and other meeting activities, meet the requirements of venue layout for
Flexible stage truss motors are typically made of lightweight and high-strength materials such as aluminum alloy, which not only facilitates transportation and installation but also can bear heavy loa
Stage light manual chain hoists, with their low cost, ease of operation, and non-reliance on electricity, have become an ideal choice for small and medium-sized stages, emergency scenarios, and requir
Truss slings for lifting are widely used in the hoisting of stage lighting trusses and outdoor performance equipment, especially in scenarios requiring frequent disassembly and assembly or exposure to
2025-02-28
创始人
0
The participation of Tianjin Kemei in the Guangzho...
Tianjin Kemei made a remarkable and eye-catching appearance at the Guangzhou (International) Performing Arts Equipment, Intelligent Acoustic, Optical and Electrical Products...
2025-02-27
创始人
0
Guangzhou (International) Performing Arts Equipmen...
In the era of the rapid development of stage lifting equipment and intelligent acousto - optic technology, every industry event serves as a crucial opportunity for innovatio...
2025-02-27
创始人
0
GET show Guangzhou (International) Performing Arts...
Tianjin Kemei Machinery Manufacturing Co., Ltd. has been deeply engaged in the stage equipment manufacturing field for many years and has developed into a modern benchmark e...
2024-09-24
admin
0
Tianjin Kemei Machinery Manufacturing Co., Ltd. Ne...
Tianjin Kemei Machinery Manufacturing Co., Ltd.: New Starting Point, New Journey - New Factory Relocation Record