X
Electric hoists represent their own machinery, strength, and toughness, while the stage is elegant, flowing, and soft, with conflicts and collisions between the two.
Regarding the issue of hand chain hoist brakes
Category : Stage Chain Hoist Series
Get a Quote
Product Details
Regarding the issue of hand chain hoist brakes
In fact, operating a chain hoist for lifting operations is a technical task. For a professional chain hoist operator, it is necessary to have rich operational knowledge and experience, understand the maintenance methods of the chain hoist, and effectively inspect and solve any problems that may occur. In fact, these are all experiences accumulated through long-term use. Below, we will mainly talk about one of the faults, the braking problem.
I believe that some operators have encountered problems with the brakes being too tight or not working properly when using a chain hoist to lift goods.
First of all, if the brake is too tight, it is mostly due to the small gap between the ratchet and the friction plate, which increases the friction force. A slight pull on the manual hoist can cause difficulty in operation, and even chain jamming. At this time, just adjust the gap distance between the ratchet and the friction plate. Moreover, brake failure is also related to the ratchet and friction plate. If the gap between them is too large, it can also cause brake failure. Just adjust the gap distance. Another issue is that the friction plate is severely worn due to long-term and frequent use, or overloading and other incorrect operating methods, resulting in the loss of friction ability and causing Huiling. At this point, new accessories need to be replaced.
From the above, it can be understood that the gap distance between the ratchet and friction plate of the chain hoist can cause problems if it is too close or too far, so it is necessary to adjust it to the appropriate distance. Also, if there is a problem with the components of the chain hoist that cannot be repaired, it is necessary to replace them with new ones in a timely manner and avoid continuing to use them to avoid accidents.
RELATED PRODUCTS .
Theater stage electric hoist controller is a dedicated multi-channel control device used to independently or synchronously operate stage hoists for lifting stage trusses and backdrops with emergency s
The stage winch controller is the core control device matched with truss hoisting and lifting of stage lights and audio systems, compatible with stage electric chain hoists. It is widely applied in th
Stage Electric Motor for Performance Rigging refers to a specialized high-torque, low-noise drive motor customized for stage lifting hoists, equipped with overload protection and wide voltage compatib
Safety is the top priority for stage rigging work. This Stage Rigging Harness adopts reinforced stitching and precise force-bearing structure design, which evenly disperses lifting pressure to avoid e
2026-05-14
创始人
0
2026 Prolight Sound
Prolight + Sound Guangzhou 2026 will grandly kick off from May 28 to 31! We sincerely invite all new and old customers to visit our booth for inspection and business negotia...
2026-04-27
admin
0
The Invisible Cloak of Stage Electric Hull
The stage electric hoist is a commonly used lifting tool when building a stage. It has a compact appearance and is easy to use
2026-03-18
创始人
0
2026 GET SHOW
Our company will make a major appearance at the GETshow Guangzhou (International) Performing Arts Equipment, Intelligent Acoustic and Optical Equipment Technology Exhibition...
2025-11-05
创始人
0
GET show Guangzhou International Performing Arts E...
Tianjin Kemei Machinery Manufacturing Co., Ltd. has been deeply engaged in the stage equipment manufacturing field for many years and has developed into a modern benchmark e...
