Electric hoists represent their own machinery, strength, and toughness, while the stage is elegant, flowing, and soft, with conflicts and collisions between the two.

Lighting And Audio Event Rental Hoist


Brief Explanation :

Key points to note when using lifting hoists in stage construction work

Category : W12 Stage Inteligent hoist

Get a Quote

Product Details

Key points to note when using lifting hoists in stage construction work

What should our staff pay attention to before, during, and after using the electric hoist on stage? Today, the editor of Tianjin Kemei Machinery Manufacturing Co., Ltd. will analyze for you to make our equipment safer and more durable to use.

When using a gourd for stage construction, it is necessary to first inspect the stage gourd to see if it is in good condition. Then, a simple test can be conducted by idling it a few times to see if it operates normally. However, during testing, it is not possible to power on for inspection to avoid accidents caused by sudden operation.

After standing still in the air for ten minutes, if everything is normal, the goods need to be repeatedly lifted up and down to check whether the various components of the stage electric hoist are working properly.

Electric hoists that perform repeated up and down lifting operations for lighting lifting also have requirements. For example, within an hour, the rated closing frequency of goods exceeding the rated load cannot exceed 120 to avoid accidents.

At the same time, it is necessary to check whether the various devices of the stage gourd work flexibly to avoid jamming. Moreover, the distance between the hook of the gourd and the outer shell of the drum during the lifting process cannot be less than 50mm, and the distance between gourds of different lifting tons varies. After the stage lifting hoist is used up, it is necessary to turn off the power in a timely manner to prevent human factors from suddenly turning on the power, causing the hoist to work automatically and causing damage.