How to prevent the stage electric hoist from shaking

　　Stage electric hoist is a lifting tool commonly used in stage performances, and it plays a crucial role in a performance.

　　Most stage electric hoists are operated by people on the ground using buttons, and can also be controlled from the driver's cab or through wireless remote control.

　　If there is shaking during use, it will bring danger to the homework, especially during the lifting of the mold for the performance, which not only affects the performance but also threatens the personal safety of the actors.

　　There are many methods to control the shaking of stage electric hoists, and the first step is to start with prevention. Before use, carefully check the condition of the stage electric hoist and do not use a faulty one.

　　In use, it is absolutely prohibited to use it in an environment that does not allow it to exceed the rated load and the rated closing times per hour by more than 120 times. Another issue is the operation, it must not be pulled or hung diagonally, and when moving horizontally, it should be slowly started. Never lift the load sharply, otherwise even if the above operation is followed, the lifted object will still shake to some extent.

　　The reason for choosing stage electric hoists for performances on stage is that their advantages perfectly match such work situations. It is compact and beautiful, not easy to attract audience attention, has low noise, and does not affect the performance. The lubricating grease is installed in the gearbox, which can prevent oil droplets from penetrating the stage. More importantly, it has extraordinary contributions to the construction of the stage, and its various advantages have become the first choice for stage lifting.

　　What are the reasons for the heating of the stage electric hoist motor

　　Stage electric hoist is a new type of electric hoist specifically designed for stage construction. Its compact, lightweight, and low noise characteristics make it very suitable for use in crowded environments. Even in stage performances, it can lift molds without affecting the program effect due to noise. Sometimes during the lifting and construction of the stage, the motor of the stage electric hoist heats up. What's going on?

　　The occurrence of overheating in stage electric hoists is usually due to overloading, and the danger of overloading is probably a clich é, so I won't explain it in detail. When encountering overload causing the motor to overheat, it is only necessary to reduce the weight. If there is no overload phenomenon and the motor still heats up, then it is necessary to check the bearings of the motor at this time.

　　When the brake clearance is too small or too large, the motor may also generate heat. At this time, stop using the stage electric hoist and adjust the brake clearance. If the circuit of the stage electric hoist has been rectified before use, it is necessary to check the circuit when the motor heats up. Incorrect connection of the circuit can cause the stage electric hoist motor to overheat and be damaged.

　　The problem of heating in the stage electric hoist motor cannot be ignored. If ignored, it will cause the temperature of the motor to continue to rise and eventually damage it. So I would like to remind everyone that when using stage electric hoists, please pay attention to the working condition of the motor to avoid danger.