What should be noted before officially using the stage electric hoist

　　Stage electric hoists can be used to build stages and decorate venues. They are practical and common lifting equipment in cultural performances, wedding planning, and are favored by many people. More and more people are buying stage electric hoists.

　　The stage electric hoist cannot be immediately put into use after receiving it. A simple operation test or inspection should be conducted first. The general content is as follows:

　　1. Press the button on the button switch until the chain is fully retracted into the chain pocket and the motor stops running.

　　2. Check the directionality of the chain, all welding points should be in the same direction, and only when all chain welding points are on the same line can the operation be completely confirmed.

　　3. Press the "down" button on the button switch and operate the hoist to lower until the limit switch is reached, at which point the motor will automatically stop

　　4. Check the lubrication of the lifting chain. The lifting chain is lubricated before leaving the factory, but it may dry out during transportation. It is recommended to maintain a small amount of lubricating oil in the chain bag so that the chain can be immersed in the lubricating oil.

　　The above are the places that should be tested or inspected before officially using the stage electric hoist. Although it may take up your time, it can eliminate hidden dangers, so it must not be underestimated.

　　How do stage electric hoists lift lighting fixtures

　　The top and bottom of the stage electric hoist are equipped with hooks, with one end connected to the stage lighting fixture and the other end connected to the lighting fixture crossbeam for fixation. It is important to ensure balance between multiple hoists.

　　The surface of the inverted electric hoist has been treated with black paint. In order to adapt to the stage performance environment and be more beautiful, the chain has also been galvanized to prevent rust. Lubricating grease is installed in the gearbox, and oil droplets will not penetrate the stage.

　　The stage electric hoist has excellent versatility and is suitable for use between 230V and 460V. The lifting height is based on 26 meters or 85 feet, and can also be customized according to your requirements, with a maximum of 40 meters or 131 feet.

　　Whenever a concert or a theatrical performance is held, there is always the presence of an electric hoist on stage, and the various mold improvements during the performance are also its credit, making it an indispensable part of the stage performance.