How to avoid chain breakage of stage chain hoists

　　As a light and small lifting tool, the stage hoist can be seen everywhere on the construction site, which brings convenience to construction but also brings some dangers,

　　For example, if the chain of the stage chain hoist breaks during use, it will not only greatly affect the progress of work, but also cause irreparable consequences. So how can we effectively avoid the phenomenon of lifting chain breakage?

　　1. Strictly control the usage time of stage chain hoists, prohibit prolonged use of stage chain hoists, and take short breaks after using them for a period of time to avoid other accidents.

　　2. Users should strictly control the lifting speed, preferably maintaining a uniform and slow speed, to prevent the inability to control the stage hoist due to the huge impact force.

　　3. Before operating the stage chain hoist, users need to carefully read and strictly follow the operating range of the hoist.

　　4. During the use of the stage chain hoist, overloading is strictly prohibited to prevent accidents and harm to the hoist and individuals themselves.

　　5. Choose a reputable manufacturer with guaranteed quality and after-sales service, and try to avoid unnecessary troubles.

　　The above are the specific methods to avoid the breakage of the stage chain hoist lifting chain. Please keep in mind that safety is the top priority.

　　Is it unnecessary to try hanging a stage hand chain hoist before use?

　　The stage chain hoist is often used for on-site construction and material lifting. Before formal use, it is recommended to conduct a trial lifting. The trial lifting of the stage chain hoist refers to using the stage chain hoist to lift the lifted object off the ground to 30 centimeters before formal lifting, with a lifting time of no less than three minutes, and observing whether there are any abnormalities in the stage chain hoist. Perhaps some people think it's unnecessary, is it really like this?

　　The main concern of the trial lifting is that the weight of the stage chain hoist does not match the weight of the lifted object. Regardless of how many tons and meters of stage chain hoist are used for lifting, it is believed that the lifted object is an estimated weight without actual weighing. The increase in the weight of the lifted object directly consumes the safety factor guarantee. Therefore, the purpose of the trial lifting is to check whether the bearing weight is within a reasonable range to avoid lifting accidents.

　　Before each lifting operation, it is necessary to conduct a trial lifting of the stage chain hoist. Although it may delay you for two minutes, the importance of its purpose cannot be ignored.